• Factory Cheap Hot Neoprene Expansion Rubber Joints - A-7 ~Rubber Pipe Connector – Lide

    Factory Cheap Hot Neoprene Expansion Rubber Joints - A-7 ~Rubber Pipe Connector – Lide

    Details Rubber Pipe is an economical, abrasion-resistant replacement for steel and cast iron pipe, either in straight lengths or where a specified radius is required. B-1 Rubber Pipe may be used in conveying ore, corrosive chemicals, sand,and other abrasive slurries. It is absolutely necessary that rigid metal pipe on both ends of the pipe be properly anchored to eliminate the danger of excessive elongation. If the pipeline is not anchored, control units should be used. Material: EPDM, NBR,NR...
  • OEM Manufacturer Compensator Expansion Joint - A-6 ~Control Units – Lide

    OEM Manufacturer Compensator Expansion Joint - A-6 ~Control Units – Lide

    Details A control unit assembly is a system of two or more control rods placed across an expansion joint from flange to flange to minimize possible damage to the expansion joint caused by excessive motion of the pipeline. The control rod assemblies are set at the maximum allowable expansion and/or contraction of the joint and will absorb the static pressure thrust developed at the expansion joint. When used in this manner, they are an additional safety factor, minimizing possible failure of t...
  • Factory Price Fabric Rubber Expansion Joint - A-6 ~Control Units – Lide

    Factory Price Fabric Rubber Expansion Joint - A-6 ~Control Units – Lide

    Details A control unit assembly is a system of two or more control rods placed across an expansion joint from flange to flange to minimize possible damage to the expansion joint caused by excessive motion of the pipeline. The control rod assemblies are set at the maximum allowable expansion and/or contraction of the joint and will absorb the static pressure thrust developed at the expansion joint. When used in this manner, they are an additional safety factor, minimizing possible failure of t...
  • Factory best selling Pipe Rubber Expansion Joint Types - A-2 ~Double Arch Rubber Expansion Joint – Lide

    Factory best selling Pipe Rubber Expansion Joint Types - A-2 ~Double Arch Rubber Expansion Joint – Lide

    Details Double-arch products are used where more movement is needed. If the piping pressure is much higher, reinforced bolts should be assembled together with flanges. Reinforcement layer of the bellows by Nylon cords and at both ends by hardened steel wire rings. The floating steel flanges are drilled according to DIN, ANSI, BS, JIS and other standards. Specifications I II III Working Pressure Mpa (Kgf/Cm2) 1Mpa (10) 1.6 (16) 2.5 (25) Test Pressure 1.5Mpa 2.4Mpa 3.75Mpa Burst Pr...
  • Best-Selling Triple Arch Expansion Rubber Joint - A-7 ~Rubber Pipe Connector – Lide

    Best-Selling Triple Arch Expansion Rubber Joint - A-7 ~Rubber Pipe Connector – Lide

    Details Rubber Pipe is an economical, abrasion-resistant replacement for steel and cast iron pipe, either in straight lengths or where a specified radius is required. B-1 Rubber Pipe may be used in conveying ore, corrosive chemicals, sand,and other abrasive slurries. It is absolutely necessary that rigid metal pipe on both ends of the pipe be properly anchored to eliminate the danger of excessive elongation. If the pipeline is not anchored, control units should be used. Material: EPDM, NBR,NR...
  • OEM China Ayvaz Flexible Joint - A-8 ~Standard Flanges – Lide

    OEM China Ayvaz Flexible Joint - A-8 ~Standard Flanges – Lide

    Details The elastomers are assembled with the mating flanges, with different standards and different pressures. Sometimes, buyers need us to buy for them, shipped together with rubber joints. Below is the flange standards which we can supply: 1) ANSI B16.5, ASME B16.47 FLANGE Design: welding neck, slip on, blind, socket welding, threaded, lap-joint Pressure: 150#, 300#, 600#,900#,1500#, Wall thickness for welding neck flange: STD, SCH40, SCH80, SCH160. SCHXXS Material: carbon steel...
  • Factory Cheap 4 Rubber Expansion Joint - A-2 ~Double Arch Rubber Expansion Joint – Lide

    Factory Cheap 4 Rubber Expansion Joint - A-2 ~Double Arch Rubber Expansion Joint – Lide

    Details Double-arch products are used where more movement is needed. If the piping pressure is much higher, reinforced bolts should be assembled together with flanges. Reinforcement layer of the bellows by Nylon cords and at both ends by hardened steel wire rings. The floating steel flanges are drilled according to DIN, ANSI, BS, JIS and other standards. Specifications I II III Working Pressure Mpa (Kgf/Cm2) 1Mpa (10) 1.6 (16) 2.5 (25) Test Pressure 1.5Mpa 2.4Mpa 3.75Mpa Burst Pr...
  • Best Price on Seismic Rubber Expansion Joint - A-6 ~Control Units – Lide

    Best Price on Seismic Rubber Expansion Joint - A-6 ~Control Units – Lide

    Details A control unit assembly is a system of two or more control rods placed across an expansion joint from flange to flange to minimize possible damage to the expansion joint caused by excessive motion of the pipeline. The control rod assemblies are set at the maximum allowable expansion and/or contraction of the joint and will absorb the static pressure thrust developed at the expansion joint. When used in this manner, they are an additional safety factor, minimizing possible failure of t...
  • Low price for Anti Vibration Joint - A-3 ~Wide Arch Rubber Expansion Joint – Lide

    Low price for Anti Vibration Joint - A-3 ~Wide Arch Rubber Expansion Joint – Lide

    Details Wide arch system is the molded expansion joint, with integral flange and without a metal reinforcement at the neck of the body. Wide arch allows greater movements and low spring rates comparing to spool type. WA and WAF is used for an economical wide arch rubber expansion joint.  WAF is filled arch, with 50% of the WA allowed movements, but it has 4 times spring rates than wide arch. Specifications I II III Working Pressure Mpa (Kgf/Cm2) 1Mpa (10) 1.6 (16) 2.5 (25) Test Pre...
  • Factory making Mercer Non-Metallic Joint - A-5 ~Threaded Union – Lide

    Factory making Mercer Non-Metallic Joint - A-5 ~Threaded Union – Lide

    Details Threaded unions is used When an economical threaded pipe connection is needed, the surface of the union is available both hot-dip galvanizing and electroplating. Both ends provided with a malleable iron union with female thread BS or ANSI. Specifications II Working Pressure Mpa (Kgf/Cm2) 1.6 (16) Test Pressure 2.4Mpa Burst Pressure Mpa (Kgf/Cm2) 4.8 (48) Vacuum Kpa (Kgf/Cm2) 86(660) Materials EPDM/NBR/SBR/NR Diameter Range DN15-DN80 Connection Method THREAD Flan...
  • New Delivery for Single Sphere Epdm Rubber Bellow Expansion Joint - A-6 ~Control Units – Lide

    New Delivery for Single Sphere Epdm Rubber Bellow Expansion Joint - A-6 ~Control Units – Lide

    Details A control unit assembly is a system of two or more control rods placed across an expansion joint from flange to flange to minimize possible damage to the expansion joint caused by excessive motion of the pipeline. The control rod assemblies are set at the maximum allowable expansion and/or contraction of the joint and will absorb the static pressure thrust developed at the expansion joint. When used in this manner, they are an additional safety factor, minimizing possible failure of t...
  • Hot Selling for Unaflex Flexible Joint - A-1 ~Single Arch Rubber Expansion Joint – Lide

    Hot Selling for Unaflex Flexible Joint - A-1 ~Single Arch Rubber Expansion Joint – Lide

    Details The single-arch product can reduce the vibration and noise, which can also solve the axial/lateral/angular movements/eccentric problems. Reinforcement layer of the bellows by Nylon cords and at both ends by hardened steel wire rings. The floating steel flanges are drilled according to DIN, ANSI, BS, JIS and other standards. If the piping pressure is much higher, reinforced bolts should be assembled together with flanges. Specifications I II III Working Pressure Mpa (Kgf/Cm2) ...